878 reviews analysed
1. Standard Motor Products IMRC3 Intake Manifold Runner Control Valve
SMP IMRC3 Intermotor Intake Manifold Runner Control Valve fits 2006 – 2002 Acura RSX; 2006 – 2002 Honda CR-V
2. Standard Motor Products AS321 Manifold Absolute Pressure Sensor
Manifold Absolute Pressure Sensor
3. 911-902 Intake Manifold Runner Control Valve For Jeep Compass Patriot 2007-2013 Dodge Caliber 2007-2012 Journey 2009-2010 Avenger 2008-2009 Sebring 2007-2009 Part# 4884549AD
- The intake manifold runner control is an engine management component that is found on newer intake manifold designs. It is usually a motorized or vacuum actuated unit attached to the intake manifold, that controls the opening and closing of butterfly valves inside of the intake manifold runners. The unit will open and close the butterfly valves in order to provide maximum manifold pressure and flow at all engine speeds.
- While an intake manifold runner is not necessary for engine operation, it does provide the engine with increased performance and efficiency, particularly at low engine speeds. When the intake manifold runner control fails, it can leave the engine without the increased performance, and in some cases even reduce performance. Usually a faulty intake manifold runner control will produce a few symptoms that can alert the driver of a potential issue and to determine if it should be replaced.
- This Intake Manifold Runner Control Valve Fits for the Following Vehicles: 2007 2008 2009 2010 Sebring 4 Cyl 2.4L
- 2007-2010 Dodge Avenger 4 Cyl 2.4L
- 2007-2012 Dodge Caliber 4 Cyl 1.8L, 4 Cyl 2.0L, 4 Cyl 2.4L
- 2009-2010 Dodge Journey 4 Cyl 2.4L
- 2014 2015 2016 2017, 2007 2008 2009 2010 2011 2012 Jeep Compass 4 Cyl 2.0L, 4 Cyl 2.4L
- 2016-2017, 2013, 2009-2010, 2007 Jeep Patriot 4 Cyl 2.0L, 4 Cyl 2.4L.
- Customers can find the product you need accurately according to the OE number. OE part number: 911-902 911902 4884549AD , 8V1010, IMRC4, MRC1002.
- This replacement intake manifold runner control valve is manufactured from high-grade materials for long lasting durability. In order to avoid the adverse consequences caused by the failure of the intake manifold control system, please replace it in time to protect your vehicle.It is the the most affordable solution for you to choose our brand part.
4. APDTY 022018 IMRC Intake Manifold Runner Control Valve Solenoid Fits Select Ford Escape Focus Fusion Mazda 5 6 MX-5 Miata Tribute Mercury Mariner Milan (1S7G-9J559-BB, L301-18-741, L80118741)
5. Fel-Pro MS96123 Intake Manifold Gasket Set
Fell-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
6. ACDelco 93196925 GM Original Equipment Secondary Intake Manifold Runner Control Valve Actuator Vacuum Sensor
ACDelco GM Original Equipment Engine Intake Manifold Runner Control Sensor is a GM-recommended replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This original equipment sensor will provide the same performance, durability, and service life you expect from General Motors.
7. Vincos Intake Manifold Gasket Replacement For Sierra Envoy Yukon Compatible with Silverado 1500 Tahoe 5.3L 6.0L V8 OHV VIN V T MS98016T MIS16340 89060413 MS92211 MS18007 MS4657 MS16340
- ✔ 【 SEALED WELL】It securely seals the gasket set so that oil leaks will be prevented each time it pools lubricant oil as it goes to the cylinder head’s drain back opening. Aside from oil, this gasket also helps prevent the entry of other harmful materials to the valve train.
- ✔ 【HIGHLY DURABLE】It is highly durable and less prone to breakage. to provide exceptional service life and reliability.
- ✔ 【WITHSTAND HARSH CONDITIONS】Advanced manufacturing technology ensures durability and optimum operation in higher or lower temperatures.
- ✔ 【PROFESSIONAL CUSTOMER SERVICE】Vincos has the professional production technology.We inspected every product before sending out,to ensure you have the best quality product,and the best value.If you have any problem please contact us.For more effectively helpness, please let us know your car make model and show the issue by pictures .We would take highly attention of your opinions and demands,to improve our products and service for you.Enjoy your shopping time.
- 【NOTE】The attachment to the gasket set must be just right-not too tight and not too loose. Any of these two conditions can ruin the gasket’s efficiency
- consequently, the valve cover itself.
8. APDTY 89060413-TSB2 Intake Manifold Leak Repair Kit Includes Upgraded Green Gaskets 2 Knock Sensors & Sealant (All ACDelco Parts; Bolts Not Included; Repairs TSB 02-06-04-023A; Solves DTC P0332)
Brand New Technical Service Bulletin Repair Kit (89060413-TSB2) Includes:
2 General Motors Knock Sensors
1 Set of General Motors Upgraded Green Intake Manifold Gaskets
Tube of Silicone RTV Sealant (Permatex)
Intake Manifold Mounting Bolts Sold Seperately; See APDTY 112685
This kit is designed to repair TSB 02-06-04-023A & 02-06-04-023 and/or DTC (diagnostic trouble code) PO332. GM has identified a moisture intrusion problem on the rear bank knock sensor on 4.8L, 5.3L, & 6.0L engines. The repair procedure has been outlined by General Motors and requires removing the upper intake manifold, replacing the rear knock sensor or both knock sensors, RTV’ing the area to prevent water intrusion, then installing new upgraded gaskets, & clearing any trouble codes.
The included upgraded GREEN gaskets and new intake bolts ( Bolts not included & sold seperately; See APDTY 112685) are designed to prevent vacuum leaks that are also very common on these engines
California Proposition 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
9. LIMICAR Intake Manifold Gasket Set MIS16340 Compatible with Chevrolet Avalanche Express GMC Sierra 1500 GMC Yukon
- ✅FIT FOR: Avalanche Express GMC Sierra 1500 GMC Yukon Intake Manifold Gaskets Set
- ✅OE/INTERCHANGE PART NUMBER: MIS16340
- ✅SPECIFICS: LIMICAR Manifold Gasket Set lead to driveability problems such as rough idling and stumbling on acceleration. LIMICAR Head Gasket prevents liquids and gases from escaping into adjacent cylinders and the surrounding oil and coolant galleries.The purpose is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinder.They are designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- ✅FUNCTION: LIMICAR Head Gasket Set are designed to save money by giving the technician the exact gaskets needed for installing an already reconditioned or fully assembled head. LIMICAR Head Gasket systems can withstand high pressures, high temperatures and aggressive media of a car. LIMICAR give technicians not only the gaskets the project requires, but the very best technology available.
- ✅NOTICE: Please check the description and compatibility chart before your purchasing. All the products have been inspected before sending out. Instruction is not included. Professional installation is highly recommended. Any questions, please feel free to contact with us.
10. Beck Arnley 158-1017 Knock Sensor
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
By our suggestions above, we hope that you can found Intake Manifold Vacuum Sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!