639 reviews analysed
1. Facon 12" x 18" Holding Tank Heater Pad for RV Camper Trailer with Automatic Thermostat Control (Pack of 2)
Feature
- Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
- Pad Size: 12” x 18”, works efficiently up to 50 gallon holding tanks.
- Built in thermostat is set to turn itself on at 45°F( + – 5 degrees) and turn itself off at 68°F( + – 5 degrees). As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
- Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required. Reticular carbon fiber design provide heated evenly & efficiently.
- 2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire)
2. Facon 12" x 18" RV Tank Heater Pad, Up to 50 Gallons Fresh Water/Grey Water/Black Water Holding Tank Heating Pad with Automatic Thermostat Control, 12V DC
Feature
- Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Camper Trailer Mobile home in winter
- Genesis Lighting own the Patent and Certificate for this Heater Pad Products, Patent No.: US10257888B2. We are the only manufacturer for this product. Our registered Brand is” Facon”
- Simply turn “ON” the power switch when the outside temperature is near to freezing. Built-in Thermostat is Set to Turn Itself on at 45°F( + – 5 degrees) and Turn Itself off at 68°F( + – 5 degrees). Turn “OFF” the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use
- Pad size 12” x 18” works efficiently up to 50 gallon holding tanks(Fresh Water Tanks, Grey Water Tanks and Black Water Tanks). 3mm Foam Insulation Pad with self adhesive make it easy installation, no extra facility required
- Passed US Standard QAI Quality Certification. 2-Wires Design without plug- Convenience for fixed place installation. Connect to 12V DC power supply and RV power switch. Red Wire=Positive(+)
- White Wire=Negative(-)
3. Facon 7 1/4"x25" Water Holding Tank Heater Pad for RV Motorhome Camper Trailer Boat with Automatic Thermostat Control 12V DC(Pack of 2)
Feature
- Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
- Reticular carbon fiber design provide heated evenly & efficiently.
- Built in thermostat is set to turn itself on at 45°F( + – 5 degrees) / 5? and turn itself off at 68°F( + – 5 degrees) / 20?. As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
- Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required.
- 2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire). The Model works efficiently up to 50 gallon holding tanks
4. Facon 7 1/4"x25" Steps and Water Holding Tank Heater Pad for RV Motorhome Camper Trailer Boat with Automatic Thermostat Control, Up to 50 Gallons Tank, 12V DC
Feature
- Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Camper Trailer Mobile home in winter
- Genesis Lighting own the Patent and Certificate for this Heater Pad Products, Patent No.: US10257888B2. We are the only manufacturer for this product. Our registered Brand is” Facon”
- Simply turn “ON” the power switch when the outside temperature is near to freezing. Built-in Thermostat is Set to Turn Itself on at 45°F( + – 5 degrees) and Turn Itself off at 68°F( + – 5 degrees). Turn “OFF” the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use
- Pad size 7 1/4” x 25” can be use as steps heater and works efficiently up to 50 gallon holding tanks(Fresh Water Tanks, Grey Water Tanks and Black Water Tanks). 3mm Foam Insulation Pad with self adhesive make it easy installation, no extra facility required
- Passed US Standard QAI Quality Certification. 2-Wires Design without plug- Convenience for fixed place installation. Connect to 12V DC power supply and RV power switch. Red Wire=Positive(+)
- White Wire=Negative(-)
5. Facon 3" x 13" RV Camper Elbow Heater Pad for 3" Elbow Pipe 12V DC (Pack of 3)
Feature
- Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
- Reticular carbon fiber design provide heated evenly & efficiently.
- Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required.
- The Model 3” x 13” works efficiently on 3” pipe elbows
- Facon Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach.
Description
Specifications
Model# GSHP-0313P
Pad size (Inch) 3″ x 13″
Foam Pad thickness 3.0MM
Volts 13.5 V DC
Power 7.5 W
Electric Current 0.55A
Lead Wire Lengh 18”
Package Include: 3 Packs 3” x 13” Heater pad
User’s Tips:
1.Do not Stretch the pad.
2.Apply pipe elbow heater pads to smooth and clean surfaces.
3.Clean the surface of the pipe with isopropyl alcohol and let dry.
4.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area.
5.This Heater pad requires 13.5V DC to operate at maximum efficiency.
6.Please ensure the connection to the proper voltage and the proper”on/off” switch is used.
7.The connection must be fused with the correct amperage.
8.If two or more tank heater pads are to be used they must be connected parallel.
9. Pipe elbow heater pads are not thermostatically controlled. Pipe insulation may be used with model#GSHP-0313P.
10.Packing include 1pc 3″x13″ Pipe Elbow heater pad.
6. Facon 8.0"x25" RV Tank Heater Pad, Up to 50 Gallons Fresh Water/Grey Water/Black Water Holding Tank Heating Pad with Automatic Thermostat Control, 120Volts AC (Pack of 1)
Feature
- Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Camper Trailer Mobile home in winter
- Genesis Lighting own the Patent and Certificate for this Heater Pad Products, Patent No.: US10257888B2. We are the only manufacturer for this product. Our registered Brand is” Facon”
- Simply turn “ON” the power switch or plug in the holding tank 120V AC power cord when the outside temperature is near to freezing. Built-in Thermostat is Set to Turn Itself on at 45°F( + – 5 degrees) and Turn Itself off at 68°F( + – 5 degrees). Turn “OFF” the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use
- Pad size 8.0” x 25” works efficiently up to 50 gallon holding tanks(Fresh Water Tanks, Grey Water Tanks and Black Water Tanks). 3mm Foam Insulation Pad with self adhesive make it easy installation, no extra facility required
- Passed US Standard QAI Quality Certification. 2-Wires Design without plug- Convenience for fixed place installation. Connect to 120V AC power supply and power switch. Red Wire=Positive(+)
- White Wire=Negative(-)
7. RV Water Heater Magnesium Anode Rod Set – 2-Piece Kit Water Heater Anode Rods with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heater Tanks – 9.25" Length ¾" NPT Threads
Feature
- WHAT YOU NEED: If you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. In order to prolong its life and save your money and time, we offer the perfect solution!
- SAFETY COMES FIRST: These RV water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time. Unlike classic aluminum zinc rods, our products are 100% for the entire family!
- COMPATIBILITY: These magnesium anode rods are 9.25” long, come with ¾” NPT threads and are compatible with Suburban and Mor-Flo water tanks. The rods use a 1-1/16 inch socket.
- LONGER LIFE: These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment.
- GREAT DEAL PACKAGE: This practical RV water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality!
Description
Small part, Big Impact
Are you tired of spending enormous amounts of money and energy with expensive
fixing procedures of your water tank? Would you like to avoid unpleasant and unforeseen
investments when it comes to your water heating sources? You’ve come to the right place!
Why is this product for you?
This 2-piece anode rod set is made from top-quality magnesium which is non-toxic and entirely
safe for the human body! The high absorption rate of corrosive elements makes it a better choice
than aluminum, keeping your water tank in perfect functioning condition for years. Plus, with
a bonus PTFE tape included, the installation process is easy for anyone
Some of the amazing features of this product:
- Set includes: 2 anode rods, 1 PTFE tape;
- Dimensions: 25″ Length ¾” NPT Threads;
- Uses 1-1/16 inch socket;
- Compatible with Suburban and Mor-Flo models;
- Material: magnesium;
- Safe for humans.
Add to cart now and reap all the benefits this RV Water Heater Magnesium Anode Rod Set has to offer!
8. Camco 02102/02103 1000W 120V Screw-In Water Heater Element – High Watt Density
Description
Product Description
Camco RV 1000 Watt Universal Element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. 1000w – 120v.
From the Manufacturer
Camco’s 1000W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
9. Reliance 100108301 1440W/120V 1" ELEMENT
Description
Product Description
The most popular element in use today. Fits Private Label, State, Reliance , Rheem, Ruud, Sears, Montgomery Ward, and many other brands. Elements individually carded.
From the Manufacturer
The Reliance standard copper-sheath elements are designed for high-watt density operation.
Conclusion
By our suggestions above, we hope that you can found Rv Tank Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!
