896 reviews analysed
1. Wonlives 1.25 inch Flexible Crevice Tool Vacuum Dusty Brush Vacuum Attachments Accessories for 32mm and 35mm Standard Hose Set of 8
- Vacuum Attachments Accessories Made of high-strength and environmental protection material, durable, high-performance, and very easy to install.
- Work saving attachments for above the floor cleaning, for upholstery, drapes, Venetian blinds, fine furniture and car interiors
- All in one kit – Universal replacement attachment brush kit accessories, suitable for standard 32mm and 35 mm diameter size
- Keep your vacuum cleaner operating at peak performance! These vacuum cleaners are recommended that the replacement brush tools should be changed every 1-3 months.
- Package includes: 1×Sofa Dusting Brush, 1×Horsehair Dust Brush, 1×Mini Dusting Brush, 1×2 in 1 Crevice Tool, 1×Crevice Tool, 1x Vacuum cleaner adapter,1x Dust cleaner, 1x Flexible Crevice Tool
2. EZ SPARES 7PCS Micro Vacuum Attachment 7 Piece Kit Keyboard Crevice Cleaning Tool Brush Kit
- Universal Micro Tool Kit
- Fits 1 1/4 inches friction-fit wands
- Fits all vacuums that accept standard 1 1/4 inch
- inside diameter attachments
- 35 mm adapter included for European sized friction-fit wands, Works With Miele Vacuums, Bosch, Sebo, Hoover, Eureka, Shark, Electrolux, Bissell, Dirt Devil, Fuller Brush and more.
- Does not fit any clip mounted wands like Dyson and Shark
EZ SPARES Micro Mini Vacuum Attachment Kit
Shipping List: 8Pcs Tool Attachments
The inner diameter: 1 1/4 inch(32mm). Please check the right inner diameter.
Applicable Model : For Most Vacuum Cleaner.
Note: Please allow 1-3mm error due to manual measurement.
Since the establishment of our company in 2009,we have been committed to produce and supply the best spareparts of home appliances for the customers in the world.
Now we are offering the most comprehensive coverage of electrical appliance replacement parts for households over 40 countries.Choose EZ SPARES, we will be your good helper to provide a more convenient,comfortable and healthier lifestyle for you and your family.
3. 1.25inch Flexible Crevice Tool for all Vacuum Hoses Accepting 1 1/4"(32mm) inner Diameter Attachments 24.4inch Long
- Fits most vacuums accepting 1 1/4″ inner diameter attachments(The inner diameter is 1-1/4inch(32mm), which means the outside diameter of the wand or hose connect to it should be smaller than 1-1/4inch(32mm) which is 31mm or 30.5mm)
- Flexible, bends up to 180 degrees
- Great for corner, heating ducts, under furniture, along side the refrigerator
- Clean hard to reach areas
- The attachment only fits vacuums accepting 1-1/4inch(32mm) inner diameter attachments. Please measure and make sure the size of your vacuum, if you’re not sure your attachment size, please measure the inner diameter of your old brush or nozzle whether it is 1-1/4inch
One of our most popular generic attachments, this 24.4″ long flexible crevice tool allows to clean the most hard to reach areas of your home. The attachment only fits vacuums accepting 1-1/4inch(32mm) inner diameter attachments. Please measure and make sure the size of attachment that fits your vacuum. If the tool got clogged, please take off both ends of the tool, and squeeze or poke it out with a long stick.
4. LANMU Flexible Crevice Tool Extension Attachment for Dyson V11 V10 V8 V7 Vacuum Cleaner with Quick Release Converter Adapter
- LANMU Crevice Extension Tool for Dyson Vacuum is made of High Quality material.Durable and Safe.
- Flexible bends up to 180 degrees: No more worry about trying to contort or bend to reach those spots.Great for corner, heating ducts, under furniture,along side the refrigerator.
- Detachable and washable:LANMU Crevice Extension Tool can be taken apart to wash,flexible bend design make it easily to be stored,have a long service life.
- Wide Compatibility:Perfect fits for Dyson V6 DC35 DC45 DC58 DC59 DC62 Vacuum Cleaners,also apply to Dyson V7 V8 V10 V11 Vacuum Cleaner with Convertor Adapter.
- Warranty:LANMU provides 180-day warranty and friendly after-sale service,makes sure the Risk-free shopping for you.
5. MaximalPower 25-inch Flexible Long Reach Crevice Tool Attachment 1.25 inches with Removable Brush Head (does not fit Sharks Vacuum with button lock. Check your vacuum hose diameter before purchase)
- Universal cleaning brush has a standard 1-3/8″ (35mm) inner diameter. Please ensure this size can fit either over or inside your vacuum hose and/or attachments BEFORE placing your order.
- Replace your lost brush attachment, or add one to your cleaning arsenal. Flexible 25 inches long crevice attachment that bends up to 180 degrees.
- Inner diameter is a standard 1.375″ (35mm) size, allowing this attachment to be used with almost any household vacuum!
- Please note : 1) The Radiator brush is an additional tool to be connected on the Long Crevice Tool to collect human hair and Pet hair.Since it’s attached on the flexible Crevice tool through Friction Fit (Press Fit). It may fall off at a certain angle. 2) The Long Crevice tool can fit vacuum hose with 32mm or 35mm diameter.It does not fit Sharks Vacuum with button lock. Please measure your vacuum hose diameter before purchase.
- Fits: Uprights that have attachment hoses, most canister vacuums and all central vacuum systems!
New MaximalPower Replacement Vacuum Attachment for:
25″ Long Crevice 1.375 inches (35mm) Vacuum Cleaner Tool Attachment with Detachable Brush Head
Replace your lost brush attachment, or add one to your cleaning arsenal.
Flexible 25 inches long crevice attachment that bends up to 180 degrees.
Inner diameter is a standard 1.375″ (35mm) size, allowing this attachment to be used with almost any household vacuum!
Comes with Removable 5 inches Brush Head.
Finally you can clean and dust dryer vents, heating ducts, around refrigerator and cars.
Fits: Uprights that have attachment hoses, most canister vacuums and all central vacuum systems!
Quantity: 1 Long Crevice Attachment & Detachable Brush Head
Can Work With The Following Brands:
Bissell, Dirt Devil, Dyson, Electrolux, Hoover, Kenmore, Miele, Oreck, Panasonic, Shark, etc.
1 x Crevice Tool Attachment (25 inches)
1 x Brush Head Attachment (5 inches)
Universal cleaning brush Inner Diameter: 1.25″ (32mm) Inner Outer Diameter: 1.34″ (34.1mm) Outer Diameter: 1.60″ (40.8mm). Please ensure this size can fit either over or inside your vacuum hose and/or attachments BEFORE placing your order.
6. E.LUO Universal Replacement 32mm (1 1/4 inch Vacuum attachments) and 35mm (1 3/8 inch) Vacuum Accessories Dusty Brush Kit, Including Flexible Multi-Angle Tube(3 Pieces)
- 【Package content】1 *Flexible Multi-Angle Tube,1*Soft brush,1*1 *35mm(1 3/8inch) to 32mm (1 1/4 inch) Adapter
- 【Attention】Fits Vacuums cleaner with 32mm (1 1/4″) or 35mm(1 3/8”) attachment like Dirt Devil, Electrolux, Hoover, Kenmore, Miele, Oreck, Panasonic etc.(not Fits Dyson ,Shark)（Please verify the size of the attachment to ensure that this is what you need ⚠️）
- 【Multi-angle bending】Flexible Multi-angle Tube can be bent to multiple angles.You can use it to clean some places that it is hard to clean, such as ceiling,Cabinet top,Sofa bottom.
- 【Feature】These vacuum attachments is made of high-strength and environmental protection material, durable, high-performance, and very easy to install.
- 【No Risk Guarantee】We are confident of our product quality. If You have any questions about the product, please feel free to contact our customer service immediately via the order or at [email protected] , We Will Always Be Your Side
7. Dryer Cleaning Kit – Generic Vacuum Hose Attachment Flexible and 28 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush. Fits vacuum hoses 1 1/4 inches or less -by Mountain Trades
- You will receive – one flexible 24 inch crevice tool cleaner and one long 28 inch brush
- VACUUM ATTACHMENT: 24″ Long – Inside measurement where your nozzle fits is 1 3/8 inches(35mm) and the tip width measures 0.6 inches(15mm) Fits vacuum hoses with a 1.25 inches or less diameter because of tapered end. ** Important – your vacuum hose needs to have a diameter of 1.25 or less to fit)** Does not fit Dyson ** See Description below for info on Shark Vacuum Cleaners. (measure the Shark vacuum hose to make sure it is 1.25 inches or less)
- Hose attachment is flexible but not flimsy – Has better airflow than others. Perfect vacuum attachment for under the fridge, dryer lint or hard to reach areas.
- Dryer lint brush is flexible – It is a 28 inch vent & coil cleaning tool designed specifically for reaching hard-to-clean areas like down in your lint trap.
- Both the hose attachment and the lint brush are flexible. If the weather is cold when you receive the crevice tool it may be a little stiff, as it warms to room temperature it will become flexible.
Included in this kit is a 24 inch flexible hose attachment for hard to reach areas like down in your dryer lint trap or under your refrigerator…… Also, included is one 28 inch long Flexible Dryer Vent and Refrigerator Brush, this brush is on twisted wire and flexible and the benefit of that is it will easily conform to the shape of your dryer lint trap…… If your dryer vent is badly clogged use the brush first to get the bulk out then use the vacuum crevice tool.(Doing this will cut down on clogs in your crevice tool even though the suction end of this tool is wide enough to have good airflow and still be small enough for most dryer “Lint traps” (end of tool is 15mm width) …. Both the hose attachment and brush are flexible and can bend back straight. They will arrive flexed/curved for easier shipping but will straighten out or bend to your application of use. To assemble the crevice tool run warm water over the ends of the hose which will make inserting ends easy. The length of vacuum tool may vary by 1/2 inch. ** ….Please make sure that your vacuum hose has a diameter of 1 ¼ inches or less.** Some Shark vacuum cleaners are 1.5 inches which is too big for this crevice tool……This tool will fit most vacuum hoses, but please measure the end of your hose to make sure it will fit….. Does not fit Dyson vacuum cleaners…..Here is a partial list of Shark vacuums that it will fit: Shark Duo Clean, Shark Ion Flex, Shark Flex, Shark Rocket. — The Shark Navigator and Swivel Steering – it will fit inside the hose but is not a tight fit, but will work… Shark Professional it will fit but you need to push it on. Does not fit Newer Bissells (unsure of older Bissells -please measure). If you are not sure if it will fit your vacuum please ask a question and we will respond.
8. Dryer Vent Cleaner Kit Vacuum Hose Attachment Brush Lint Remover Power Washer and Dryer Vent Vacuum Hose
- [Remove LINT BUILD-UP] – Sealegend dryer vent cleaner kit removes lint that has accumulated for many years in the dryer vents, so your equipment runs more efficiently.
- [More than 28” long] – Flexible and handy vacuum hose attachments over 28inche in length allow for deep access to difficult places. Perfect for cleaning appliances that you can’t move.
- [SUCTION CONTROL] – Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- [HELPS PREVENT FIRES] – Using Sealegend Lint Remover regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- [Package Contains] – 1* Sealegend dryer vent cleaner kit
9. Dryer Duct Cleaning Kit- Generic Vacuum Hose Attachment Flexible and 30 inch Flexible Dryer Vent Cleaning Brush and Refrigerator Coil Brush/Radiator Brush. Fits Vacuum Hoses 1 1/4 inches or Less
- You will receive – one flexible 24 inch crevice tool cleaner with 3 adapters and one long 30 inch brush
- VACUUM ATTACHMENT: 24″ Long – The tip width measures 5/8 inch check with of area you want to clean. With supplied adapters fits vacuum hoses up to 1 3/4 inches ** Does not fit Dyson **
- You can use the crevice tool without the adapters if it fits or use one or all 3 adapters to make it fit your vacuum hose. The adapters will fit into each other to make a variety of connections. Just try one till it fits. The smallest size they will fit is 1 1/16 inches up to 1 3/4 inches. You’ll probably say these REALLY are the Worlds Greatest Adapters.????
- BRUSH SPECS: Full Brush Length: 30” – Without Handle: 24-1/4” – Bristles Diameter: 1-1/2” – Steel Wire Diameter: 3/8” – Brush color: black – Handle Color: black – Longer than other brands.
- BRUSH USES: Clean your dryer lint trap, fridge coils/ condenser coils, exhaust vents, AC vents, radiators and under your appliances. Bends like a lizard in your dyer lint trap but is not too flimsy.
10. PetOde Dryer Vent Cleaner Kit Dryer Vent Vacuum Attachment Lint Remover Power Washer and Dryer Vent Vacuum Hose
- 【REMOVES LINT BUILD-UP】: Dryer Vent Vacuum Hose Attachment removes years lint build-up deep within your dryer vent, so your appliance run more efficiently.
- 【OVER 28in LONG】: Handy vacuum hose attachment measures over 28in long to reach deep into difficult places
- Perfect for cleaning behind appliances you can’t move.
- 【SUCTION CONTROL】: Switch between 2 suction control settings to best suit your cleaning needs. Perfect for light cleanups and a heavy-duty power clean.
- 【HELPS PREVENT FIRES】: Using Vacuum Hose Attachment regularly to clean your dryer vent and help prevent deadly dryer vent fires from sparking.
- 【CUSTOMER SERVICE】: We will do our best to provide our customers with satisfactory products and services. If you have any questions, we will respond to you within 24 hours.
By our suggestions above, we hope that you can found Small Vacuum Bendable Attachment for you.Please don’t forget to share your experience by comment in this post. Thank you!